Signal NVR 2708 Manual de usuario descargar pdf (Pagina 10)

14.Security : Mac Locking & AES 128 Encryption

15.Modulation : 2x2 MIMO,BPSK,QPSK,16QAM,64 QAM-

OFDM

16 VLAN : 802.IQ,802.IP and QinQ Tagging

Must be transparent for the VLAN Traffic.

17.QOS : 4 Level.

18. SFP Port : Must be Supported1+1 for TDM application

Ring/1+1 for Ethernet applications

19. Maximum frame : Size 2048 Bytes

20. Spectrum View : Spectrum View feature must be available in order

to find out the best channel in interfered.zone.

21.Burst Synchronization :Proposed system must be supported for Burst

Synchronization feature to enable co located

Installation.

23. Management protocol

Upgrade capabilities : SNMP and Telnet

(a) support S/W backup and restore through EMS

(b) Multiple sites upgrades through EMS “local and

remote over the air.

24.Performance :PM logs for 30 days event logs and provision for

Monitoring monitor logs must be available through EMS.

25. Compatibility alarm :Non-SW upgrade alarms , available in the UM

26. Operation temperature : -35°k to + 60° C

27. Humidity : ODU:IP67 100% Non condensing

28.Ethernet Port :10/100 Base T with Auto-Negotiation(IEEE802.3u)

Framing / Coding IEEE 802.3

4.1.3. ANNEXURE II

SPECIFICATION FOR FOUR PORT 6 Mbps PER PORT-- POINT TO MULTI POINT

(4 points)RADIOS FOR GATES/REMOTE LOCATIONS

QUANTITY REQUIRED:5 SETS

Note: Each set will have 4 numbers slave units and one number main unit with all

necessary accessories.

1. Frequency : MultiBand Radio Supporting 2.412 to

2.472 and 4.960 to 5.950 Ghz.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 16 17 18

Sin comentarios

Signal NVR 2708 Manual de usuario Pagina 10